Window Sliding Vent Glass R&R

The sliding part of the rear window is not difficult to remove and replace.

REMOVAL

(1) Slide the upper run channel out of the window frame.
        If needed, remove the lower run channel to provide clearance to remove the window.
(2) Slide the vent glass upward to remove from the lower window frame.
(3) Lower the glass out of the upper window frame and remove.

INSTALLATION

(1) Slide the vent glass upper edge into window frame and insert the lower edge into the lower molding.
       Replace the lower run channel if it was removed
(2) Position the upper run channel into the window frame and slide it into place.
(3) Verify vent glass operation.

  Top of Page  

  DodgeRam.info Home