DodgeRam.info > TSB's > 08-30-99 > Page 1

TSB 08-30-99

Outside Power Mirror Pivot Arm Rotates With Little Resistance

Visit Geno's Garage for Truck accessories.

Page 1 of 4

Parts:

AR (1)    05016568AA   Mounting Kit, Outside Power Mirror, Right Side
AR (1)    05016957AA   Mounting Kit, Outside Power Mirror, Left Side
AR (1)    05010901AA   Reinforcement Bracket, Left (Driver Side) Outside Power Mirror
AR (3)    00153912        Screw, 0. 1 90-16 X 0.50 in. Self Tapping
AR (1)    82300234        Mopar RTV Sealant  

Repair:

1.    Disconnect and isolate the battery negative cable(s).
2.    Swing the outside power mirror forward (Figure 1).

3.    Open the door.  
4.    Remove the two screws in the door pull cup that secure the cup to the inner door panel (Figure 2) and remove the cup.

5.    If equipped, remove the manual window regulator crank handle with a removal tool (Figure 3).

6.    Remove upper trim panel screw.
7.    Using a trim panel removal tool such as Snap-on Al 61 B, gently pry the trim panel away from the door around the perimeter to release the retainers. Support the door trim panel by allowing it to hang on the door handle.
8.    Unplug the power mirror motor wire harness connector (Figure 4).

TSB Summary          Second Page