DodgeRam.info > TSB's > 26-01-99

TSB 26-01-99

Service manual torque value revision

Visit Geno's Garage
for Truck accessories.

Date: January, 1999

Models: 1998 BR/BE with diesel engine

Discussion:

This TSB regards a correction to the vehicle service manual. Group # 26 is the correction of errors in the service manuals. The corrections are replacement pages for the affected errors. In this case, this TSB only addresses one error in the Ram service manual for 1998 models. Other errors are addressed in the TSB for other service manuals.

If you have a DC service manual for 1998 Ram Trucks the following is the correction to be made: Section 9 (5.9 Diesel engine) page 176, removal and installation of engine mounts, bottom of the page, right side under the sub-heading "Installation,...Install new bolts and tighten to 149 Nm (110 ft.lbs) torque".

The change indicated is quite clear that the revision is for torque changes in the manual.

notes: Information only

Thanks to Bob Bergevin for supplying this TSB information

Top of Page

DodgeRam.info Home

This page was edited on: May 3, 2004